Upgrade FOTGA DP500IIS Dampen DSLR QR Follow Focus for 15mm Rod 5D II III+ Gear

Description

NEW Upgrade Fotga DP500IIS Dampen DSLR Follow Focus for 15mm rail rod 5D II III 60D 7D 600D D7000 D7100 with 3 different size of gears
FOTGA DP500 II S Quick Release Version with Adjustable Dampen
A follow focus is a focus control mechanism used in film and video cameras. It is ergonomic rather than strictly necessary; in other words it does not contribute to the basic functionality of a camera but instead allows the operator to be more efficient and precise. It is usually operated by a focus puller but some camera operators prefer to pull their own focus .
The mechanism works through a set of gears on the follow focus that are attached to teeth on the focus ring of the lens. These gears feed to a wheel which, when turned by a focus puller, will spin the teeth and thus the ring on the lens.
Features:
★
This New arrival
DP500IIS follow focus is upgraded based on the previous DP500
II
version
follow focus.
More elegent apperance,more practicable.
★ There is
an improvement on its inner structure
to reach a high level in this field,which permits much less backlash,even better than the previous DP500II follow focus and most follow focus on the market.
There is also a button downside can adjust the tension of of the gearbox to reach 2 dampen level.
★
There is a part with white line on the head of the follow focus which it is rotatable. And it is very helpful when you put the whole follow focus rig system on your shoulder, or somewhere is higher than your eyes. In this condition, you just need to the point where your vision can reach.
★ Further more,the gear wheel on it can be detached and installed in other side,which makes it
suitable for both left-hand and right-hand photographers
.
★
The white mark ring is made of magnet material.
It can be detached or attached very easily and quickly on mental-made follow focus.You can also buy additional mark ring.
★
The particular part of this follow focus is it can use different size gears.
It can work with 3 different size gear to meet your different need with various lens:
M0.8-38T gear: 38x0.8mm pitch,diameter is approx.28mm
(included)
M0.8-43T gear: 43x0.8mm pitch,diameter is approx.31mm
(included)
M0.8-65T gear: 65x0.8mm pitch,diameter is approx.49mm
(included)
★
Quick-release version,
easily attach and detach.
P.S. : Please note that this is the standard version without stops. We also have new arrival DP500IIS with A/B stops. Just store search in our shop.
Specifications:
●
Material: aluminum.(Gear wheel outside is made of ABS material)
● Improved design has dampening which gives virtually zero backlash(<0.5mm).
● Long-life precision engineered gearbox enables accurate and reliable focusing
● Compatible with industry standard Follow Focus Whip or Crank.
● Gear drive can be mounted from both side.
(Works for both right-handed and left handed)
● This set includes flexible gear belt can be used with any zoom or prime lenses with a wide range of lens diameters(any size
from 46 to 110mm
)
● Adjustable locking systems
●
Mounts onto 15 mm Rod Support (60mm center to center
distance
).
● MOD Drive Gear: Industry standard
0.8.
● Compatible with industry stand 15mm rods
● Rail distance: 60mm
● Rail diameter: 15mm
Suitable for:
All DSLR cameras,Vedio cameras
Package including:
• Fotga DP5002S Dampen Quick Release Follow focus x1
• 0.8mm matching gear belt x 1 (adjustable for 46mm-110mm)
• Standard M0.8-38T gear x 1
• Standard M0.8-43T gear x 1
• Standard M0.8-65T gear x 1
P.S. : Please note that this is the standard version without stops. We also have new arrival DP500II-S with A/B stops. Just store search in our shop.
→
Click Here to buy extra griven belts for your follow focus!
→
Click Here to buy a speed crank whip for your follow focus!
We are happy to accept orders from Europe and Asia and United States just as shown in the listing countries.
United States, France, Germany, Belgium, Ireland, Luxembourg, Netherlands, Spain, Portugal, Sweden, Austria, Findland, Denmark, Greece, Hungary, Poland, Malta, Turkey, Australia, Japan.
We will offer Recorded shipping service to US location.
Please allow up to 48 hours preparation for shipping, although usually item send within 24 hours after payment confirmed.
We will not be responsible for item loss because of wrong or undeliverable address.
We Accpect PayPal
Accpect Credit Card Payment Through Paypal(Verified only with confirm address)
No Surcharge
We offers a No-hassle exchange within 30days only if your goods are found to be defective by manufacturer. The faulty item will be exchanged for the same model once the return guidelines are followed:
*We might ask buyer to test the item in order to eliminate improper use, buyer has responsibility to cooperate and follow the test correctly.
*The item must be returned in NEW condition and with all the original manufacturers packaging, including cartons, parts and instructions manual etc.
*Customer's response of cost of return shipping, while we will cover all expense of send out replacement.
*Any returning must enquire us first, to send back without return ID (given by our customer service) will not be accepted.
*Shipping and insurance charges are not refundable.
*We does not has responsibility to response on item lost during returning.
*Items found not to be defective will be returned at buyer's expense.
Click here to get eBay templates at Auctiva.com
Powered by
eBay Turbo Lister
The free listing tool. List your items fast and easy and manage your active items.
Powered by SoldEazy
The
Panasonic AJ-PCD20
is a P2 drive which acts as a conduit between P2 cards and a computer. Specifically for use with non-linear editing systems, this drive can ingest up to five P2 cards at one time over FireWire or USB 2.0.
This is a Bundle. The bundle includes the Panasonic AJ-PCD20 P2 drive (Serial Number J8TBA3348), Panasonic power supply (Serial Number 08601113G), compatible firewire cable, and compatible USB cable. All are in good working condition. Slight cosmetic damage appears in the upper front right corner of the P2 drive housing. See photos for details.
Thank you for being the wonderful person that you are,
Welcome to eBay. Are you renting or buying?
If you are renting, then please be sure to return the P2 memory card drive in the good condition you will receive it in. If upon arrival at your location you find the P2 memory card drive to not be in good condition, then you are to immediately contact me through eBay and tell me of the situation. No using the P2 memory card drive for thirty days and then telling me you want your money back because the rental is no longer in excellent condition. I am an honest business man. I expect honesty from my customers. If you send the P2 memory card drive back to me and the rental is damaged, then I will have to deduct for any damage, scratches, nicks, from any refund amount issued. Buyer pays return shipping.
If you are buying, congratulations on taking advantage of a bargain. I hope you will be making many awesome videos with your purchase.
By the way, the P2 memory card drive has never been rented out before. However, some people might like to buy things, use them a while, and return them. For that reason, I make it possible to rent. The small rental fee is added to the shipping. It's called a handling charge. If you are buying it, then the small rental fee becomes part of the total purchase price. ;) I wish us happiness and good health. Best Regards