Teradek Bolt Pro 300 Multicast Wireless Transmission System FAIR SEE NOTES

Description

The Teradek Bolt Pro 300 Multicast Wireless Transmission System is an industry favorite for wireless video transmission. Key features include:
HDMI Input / Output.
This version of the kit features HDMI input / output. However, we also sell separately the
Teradek Bolt Pro 300 Multicast Wireless Transmission System
if you need HD-SDI cross conversion and export.
1080/60p Wireless Monitoring.
Offers support for uncompressed 10-bit 4:2:2 1080p video at up to 60 frames per second. Theoretically line-of-sight transmission is up to 300 feet without break-up or image degradation, and up to 100-plus feet without line-of-sight with less than 1ms latency.
Multiple Receiver Streaming Capability.
This kit includes one transmitter and one receiver. However, the Bolt Pro 300 transmitter offers the ability to send video to 4 receivers simultaneously.
What's in the box?
Bolt Transmitter
Teradek Bolt Pro 300 HDMI Wireless Receiver
D-tap to 2-pin Lemo cable
AC adapter
(2) HDMI cables
Lightstand adapter
Retail box
May NOT include hot shoe adapter.
Cosmetics
Heavy wear.
Performance
Functions flawlessly.
Datavideo TBC-1000 Single Channel Full Frame 4:2:2 Time Base Corrector
Refurbished with Low-Noise Modifications
Full documentation available as PDF on request
Items Included
Modified TBC-1000 device
12V 1.5A power supply
Modifications Made in TBC-1000 ModV1RevB
The goal of the modifications we’ve made is to provide the high-quality, low-noise signal characteristic of the TBC-100 device, while maintaining the convenience of being a standalone device. The result is a device that is perfectly suited for incorporation into a modern analog video digitization workflow: the most common use case of the TBC-1000 device today. Modifications from the original device are as follows:
Distribution amplifier board removed entirely.
Power supply uses a linear voltage regulator—the same regulator used in the TBC-100 product.
All electrolytic capacitors replaced with new Nichicon brand capacitors.
BNC connectors are used for all inputs and outputs—for both composite and S-Video signals.
New internal wiring from connectors soldered directly to PCB, providing the cleanest possible signal path to the board.
Input selector toggle switch added, allowing for input to be selected regardless of which cables are connected to the device.
All inputs and outputs moved to the back of the unit.
The status LED on the TBC-100 board (previously hidden from view inside of the case) is exposed as an additional LED on the front panel of the device, providing more insight into the operation of the device.
577834