Iconix RCP-160 Touch Screen Video Camera Remote Control Panel w/ Power Supply

Description

For sale an Iconix RCP-160 Video Camera Remote Control Panel. Includes the unit and power adapter only. Fully tested without issues. Here is a brochure with further information.
Informamtion:
http://www.millercanada.com/manuals/rcp_productsheet.pdf
USA (lower 48 states)
Blonder Tongue CAMS-60B Channelized Agile Modulator
The CAM-60 Series are professional quality, channelized agile, heterodyne audio/video modulators. These units provide audio and video modulated RF carrier output on any SUB, VHF, UHF, or CATV channel (7 to 450 MHz and 50 to 860 MHz). Any standard audio/video source can be used, such as satellite receivers, television cameras, video tape recorders, or television demodulators. These modulators feature a frequency agile output converter and provide +60 dBmV output. A low cost, removable single channel output filter module is used to provide channelized configuration of the CAM-60 Series. Stocking distributors can maintain an inventory of mainframes and a mix of output filter modules. Customer requests for individual channels can be easily accomplished by combining the frequency agile mainframe with the desired removable output filter module. Several models are available, including: CAMS-60, Single IF Modulator; CAMS-60-MF, Single IF Mainframe; CAMD-60, Dual IF Modulator; CAMD-60-MF, Dual IF Mainframe; and OFM-60-860, Output Filter Module. The CAMS-60 comprises one CAMS-60-MF Single IF Mainframe and one OFM-60-860 Output Filter Module for the desired VHF, CATV, or UHF channel. The CAMD-60 comprises one CAMD-60-MF Dual IF Mainframe and one OFM-60-860 Output Filter Module for the desired VHF, CATV, or UHF channel. The CAM-60 Series takes baseband audio and video and modulates these signals onto the desired output channel (each modulator has separate audio and video inputs). The heterodyne conversion process used in the CAM-60 Series employs a crystal referenced, PLL synthesized local oscillator, with a 12.5 kHz tuning increment. This guarantees rock solid, no-drift output for the life of the modulator. A custom SAW filter is employed to provide true vestigial sideband selectivity with built-in FCC group delay pre-distortion. The CAMD-60 models provides separate external visual and aural IF loops. An external IF loop is provided, which allows interfacing with video all-call and signal scrambling systems while CAMD-60 models have dual IF loops. The CAM-60 Series meets FCC Docket 21006 aeronautical frequency offset requirements (+/-5 kHz video carrier accuracy) and accepts standard polarity (sync negative) video in the range of 0.7 to 2.8 V p-p. A4.5 MHz audio input is provided, which preserves the stereo audio available from most satellite receivers and demodulators. A rear panel switch allows selection of either baseband audio or 4.5 MHz audio. An optional integrated BTSC encoder module is also available.
EOU
Diversity-IT
Diversity-IT was founded on the guiding principle that customer service counts. We customize our programs to your IT sourcing needs. Where other IT component providers treat you as just another number, we provide you with white glove service.
Additional Services
Every organization has end-of-life IT equipment. At Diversity-IT we're committed to helping extend that life cycle and reduce e-waste across the country. Instead of paying to dispose or store that equipment, your goods may actually earn you cash. Please contact one of our buyback specialists to get full details and find out how much your equipment is worth.
Contact Us
Diversity-IT.com
27324 Camino Capistrano Unit 129
Laguna Niguel CA. 92677
***