-40%

AC Compressor SERVICE KIT for Kubota M108S Tractor 3C581-50060 SV07E

$ 205.91

Availability: 11 in stock
  • Refund will be given as: Money Back
  • Item must be returned within: 14 Days
  • Part Type: HVAC COMPRESSOR
  • California Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.
  • MPN: ACP5791KIT
  • Compatible Equipment Type: Crawler Tractor
  • Model: M108S
  • Return shipping will be paid by: Buyer
  • Brand: acpartsguys.com
  • Restocking Fee: No
  • Condition: New
  • Returns Accepted: Returns Accepted

    Description

    Up for auction is a NEW aftermarket replacement AC Compressor SERVICE PACKAGE for your
    Kubota Tractor.
    WILL FIT:
    KUBOTA   M96S                  ALL MODELS
    KUBOTA   M108 TRACTOR***NOTE-ONLY  S, SHDC, HDC2, DSC, and DSC2 Models.
    KUBOTA   M110
    only
    X and XDTC Models
    KUBOTA   M108S
    only
    SHDC, HDC2, DSC, DSC2 Models
    KUBOTA   M5040 TRACTOR  ALL MODELS
    KUBOTA   M7040 TRACTOR  ALL MODELS
    KUBOTA   M8540                  ALL MODELS
    Will Replace Compressor:
    3C581-50060
    3C581-97590
    447220-6771
    447220-6750
    447260-5780
    447260-5781
    503-182
    503-182R
    0 986 J40 208
    447200-9130
    447200-9490
    447220-6750
    447220-6771
    447260-578
    447260-5780
    447260-5781
    447260-5791
    447280-3090
    5512655
    447260-5782
    447260-5783
    447260-5784
    1906-7001
    447260-5781
    3C581-50060
    3C581-97590
    AM3C581-97590
    RD451-93900
    20-12403-R
    Specs:
    SV07E  EAR Mount
    SINGLE GROOVE CLUTCH
    4.637IN (117.78MM)O.D
    12 Volt
    RETAIL LIST 89.47
    PLEASE NOTE:
    You should know that if your bearing is bad that it is usually caused by high head pressures. There can be a few reasons for that to happen but we strongly suggest that you replace the condenser as well. If there is an obstruction in the condenser, it will raise your high side pressures and cause the bearing to fail. I sell allot of these compressors and most of them are replaced due to bearing problems.
    These compressors are very hard to find NEW. Just don't want you to have any complications with it. PLEASE replace the receiver/drier and have your old condenser and evaporator flushed very thoroughly if you can not replace them.
    Let me know if you need a new condenser or evaporator as I will be happy to post another auction for you.
    Please read all terms and conditions before bidding!
    Shipping
    SHIPS TO ANYWHERE IN THE UNITED STATES VIA STANDARD SHIPPING SERVICE.  EMAIL ME FOR INTERNATIONAL RATES.
    PLEASE ALLOW 7 BUSINESS PROCESSING DAYS FOR SHIPPING
    OUTSIDE THE STATES AND INTERNATIONAL
    .
    For your one year warranty to be valid, proof of
    replacing condenser, accumulator/drier, expansion valve and flushing the system are REQUIRED
    YOU WILL SAVE
    $$$
    WHEN YOU Bid to WIN This Auction!
    Visit my website Ebay store:
    http://stores.ebay.com/acpartsguys
    Emai
    l
    @ acpartsguys if you need us to post an auction for any A/C parts.
    
    RETURNS:
    We do offer a refund policy. In order to return an item for refund: 1) Email us within 14 days of receipt of the item for a return authorization number and instructions. 2) All returns must be in the same condition as when sold and may not have been installed in your vehicle. 3) ) Shipping is not refundable or reimbursable. 4) After 30 days of receipt of the item, the sale is considered final.
    The picture on this listing is a representation of the compressor you will be receiving
    Up For Sale
    2008-2017 Honda Odyssey 3.5L Re-manufactured a/c compressor with clutch assembly
    2008-2015 Honda Pilot 3.5L Re- manufactured a/c compressor with clutch assembly
    2009-2014 Honda Ridgeline 3.5L Re- manufactured a/c compressor with clutch assembly
    2007-2013 Acura MDX 3.5L Re- manufactured a/c compressor with clutch assembly
    2010-2013 Acura ZDX 3.5L Re- manufactured a/c compressor with clutch assembly
    What we do
    Every compressor is re-manufactured to meet or exceed OEM specifications. We only re-manufacture OEM compressors. All compressors are both leak tested and Function tested to ensure the compressor is in perfect working condition prior to being shipped. We perform these tests on ALL New and Re-manufactured a/c compressors. All seals, o-rings, control valves and gaskets and all failed hard components are replaced with new parts during the rebuild process. If you have any questions or concerns about the re-manufacturing process please feel free to message us!
    Compatibility
    Table
    Please verify that this compressor fits your vehicle prior to purchasing using our compatibility table on this listing. We spend hours making these tables to make sure they are 100% accurate. Please send us a message with your Year. Make, Model, Sub model, and engine size and or supply us your vin number, if you would like to have us verify fitment for you. Upon purchasing the compressor you have the option to add the vehicle specifications. Please add your specifications to avoid receiving the incorrect compressor. If the compressor you receive is incorrect and you did not supply vehicle specifications or message us your vehicle specifications, we are not responsible with paying for return shipment and there will be a 20% restocking fee applied.
    Compressor Installation
    ALL COMPRESSORS ARE ONLY SHIPPED WITH TESTING OIL! COMPRESSORS NEED OIL ADDED PRIOR TO INSTALLATION NOT USING A/C MACHINE!
    The number one reason of New or Re-manufactured a/c compressor premature failure  is due to improper installation.
    To attain a warranty compressor the bellow installation process and procedure MUST be performed and the parts listed in this procedure must be replaced to attain a warranty compressor.
    Follow all local, state and federal regulations when servicing mobile A/C systems and read this instruction sheet prior to starting any repairs.
    In most cases you will have to reuse your OEM manifolds and switches from your original compressor.
    In most cases the connector/plug from the original compressor will need to be spliced on to our compressor. Every compressor that needs this done will come with 14-16 gauge heat shrink butt splices.
    Oil charges and oil types should be closely adhered to for proper A/C performance. If you need the proper oil information please message us!
    If you are uncertain of where to add oil or how much oil needs to be added to the compressor prior to installing on the car PLEASE MESSAGE US!
    1.
    Remove compressor, receiver drier or accumulator, orifice tube or expansion valve.
    2.  We highly
    recommend
    replacing all condensers that use the R134a freon. DO NOT FLUSH!
    WARNING:
    NEWER STYLE CONDENSER DESIGNS ARE VERY HARD, AND SOMETIMES IMPOSSIBLE TO FLUSH, IN THOSE CASES IT IS HIGHLY RECOMMEND THAT IF THE COMPRESSOR HAS A MAJOR FAILURE THE CONDENSER SHOULD BE REPLACED.
    3.
    Install half oil charge into the compressor and the remainder throughout the system. Turn compressor shaft 8-10 full revolutions to insure front seal and other internal parts are lubricated.
    4.
    Install new receiver drier or accumulator and new orifice tube or expansion valve.
    5.
    Evacuate the A/C system for a minimum of one hour.
    6. Add system specification Freon charge and test accordingly. Charge the system with a Certified A/C charging station, do not use cans!
    If the above steps are not performed the compressor warranty will be in valid
    The accumulator/drier must be replaced prior to installation.
    Warranty
    There is warranty on this compressor for 1 year from the date of purchase, not when it was installed on the vehicle.
    The warranty is for only 1 replacement compressor.
    Our  warranty does not cover labor, removal, installation, diagnostic and any other related expenses or concerns with the vehicle.
    Only the compressor.
    The above compressor installation process MUST be followed to attain a warranty compressor
    The accumulator/drier must be replaced prior to installation.
    If the replacement compressor locked up on the vehicle, warranty is
    void
    . Compressors lock up due to improper system diagnosis or improper installation of the compressor.
    If the system was a catastrophic failure. Accumulator/drier, orifice tube and or expansion device, and condenser MUST be replaced as well as a complete system flush. If these step have not been done regarding a catastrophic compressor failure, warranty is void.
    Shipping
    There is free shipping to all 50 states in the United States as well as all U.S Territories!
    All international shipments will include an extra shipping charge.
    Not all items will ship from the advertised location due to having multiple strategic warehouses around the United States!
    Buyer is responsible to pay all import and duty fees on the purchased item.