A/C Compressor Fits Land Rover Range Rover 2006-2009 V8 OEM PXV16 97570

Description

OUR PRODUCT
You are purchasing a Reman compressor with clutch.
SEE COMPATIBILITY
We would appreciate if you could leave us a note with the vehicle specification (Year, Make, Model and Engine) in PayPal when making the payment or in the eBay email system, that way we can be sure that the a/c compressor will fit properly.
THE SYSTEM (COMPRESSOR INSTALLATION)
1 Year Ac Warranty & Agreement
Follow all local, state and federal regulations when servicing mobile A/C systems and read this instruction sheet prior to starting any repairs.
Oil charges and oil types should be closely adhered to for proper A/C performance.
If you are uncertain of
OIL CHARGE OR REFRIGERANT TOTAL SYSTEM  CHARGE
refer to the under hood decal or, OEM service manual.
USE ONLY R-12 OR R-134a REFRIGERANT.
1.
Remove compressor, receiver drier or accumulator, orifice tube or expansion valve.
2.
Flush the condenser and evaporator using
NON-OIL BASED
A/C flush. On expansion valve systems
THE VALVE MUST BE REMOVED
before the evaporator can be flushed.
FLUSHED CONDENSERS FROM OUTLET TO INLET AND EVAPORATORS FROM INLET TO OUTLET.
WARNING:
NEWER STYLE CONDENSER DESIGNS ARE VERY HARD, AND SOMETIME IT WOULD BE IMPOSSIBLE TO DO FLUSH, IN THOSE CASES IT IS SUGGESTED THAT IF THE COMPRESSOR HAS A MAJOR FAILURE THE CONDENSER SHOULD BE REPLACED.
3.
Drain all the oil from the new compressor and dispose of according to local, state and federal laws.
NOTE:
if you compressor has a drain plug you will need to open it up and drain what  oil is in there too,
4.
Install half oil charge into the compressor and the remainder throughout the system. Turn compressor shaft 8-10 full revolutions to insure front seal and other internal parts are lubricated.
5.
Install new receiver drier or accumulator and new orifice tube or expansion valve.
6.
Evacuate the A/C system for a minimum of one hour.
7.
After evacuation install half the refrigerant charge and let the system set for 1 minute. This will allow the refrigerant to pick up oil and spread more evenly throughout the system.
8.
Start engine whit A/C controls on MAX AIR with door and windows open.
9.
Add the remaining charge of refrigerant as called for by the manufacture.
WARRANTY
The warranty over this item consist in a onetime replacement.
Our  warranty does not cover labor, removal, installation, diagnostic and other contingent expenses, just the compressor.  We can offer an advanced warranty replacement. For that, a deposit fee of US 0 would be required, to ensure the return of the original compressor. This deposit would be reimbursed once the original compressor is received back.
In either case, if the compressor  is returned locked up or contaminated , the warranty will be VOIDED. Please, Have your system checked by a professional to guarantee a long and sustainable ac system for years to come.
​​​​​​​
The compressor must be returned with a copy of your purchase order and certified mechanic's invoice.
Thank you and here always to help.  ​​​​​​​
RETURN POLICY
Any warranty after 30 days, customer must pay all shipping charge.
All returns must be pre- approved.
SHIPPING
Free ground shipping to the continental US
Shipment to Alaska, Hawaii, Puerto Rico, Virgin Island, American Samoa and Guam do not qualify for free shipping, shipping is to these locations (USPS Only)
YOUR SATISFACTION IS OUR MAIN GOAL
Have any questions?
Please contact us and we will respond extremely quickly
PLEASE USE ATTACHED COMPATIBILITY GUIDE TO VERFIY FITMENT BEFORE PURCHASE
THIS KIT WILL NOT FIT ANY AFTERMARKET COMPRESSORS.
Fit For:
2013 - 2019 FORD EXPLORER 3.5L
Fits For: For Original Compressor (7SBH17C)
We understand the need to receive the parts right away.
That is why we ship most orders same day and ship USPS Priority Mail AT NO EXTRA CHARGE
This is a Brand New A/C Clutch Kit  which includes the following:
Pulley with the bearing already pressed in
Front Plate
Electromagnetic coil
ACC's :
C-Clamps, Shims, Center BOLT
We are an AMERICAN Company With AMERICAN EMPLOYEES
Please check our feedback  and Buy with confidence
Returns are accepted within 30 days of purchase. I
n cases of buyers remorse,
Return shipping is the responsibility of the buyer. eBay may offer a return shipping label at a fee, but the buyer can ship the item back with any courier they choose. Please make sure to mark your item as shipped and to upload the return tracking number into the eBay return. This way eBay knows the return has been shipped back and the return will not time out and close. Once the item has been received it will be opened and inspected under video surveillance. If the item is not received back in the same brand new condition as it was sold, a restocking fee will be charged. The buyer is responsible for any damage caused by not properly packaging the return and or courier damage during return shipping. If any damage is present or the item shows signs of installation or any type of wear, a restocking fee will be charged and the video and photos of the damage will be sent to eBay. If a false return request has been made so as to not pay for the return shipping we will report the buyer to eBay and claim all return shipping costs. If you have any questions please let us know.
We are very pleased to offer a 90 day replacement warranty. Sellers liability towards the Buyer for any defective product is limited to the purchase price of the product or the replacement of the defective product at the sellers discretion.