A/C AC Air Compressor Clutch Kit For Mazda 3&5 2.0L 2004 2005 2006 2007 2008-09

Description

DESCRIPTION：
COMPARE THIS KIT WITH THE OTHERS
THIS KIT INCLUDES
THE PULLEY WITH BEARING PRESSED IN THE COIL WITH FULL HARNESS THE CLUTCH PLATE HUB
THIS KIT INCLUDES THE CENTER BOLT, C-CLAMPS, AND SHIMS
Replacement for:
2004-2009 MAZDA 3 NON TURBO ENGINE
2006-2010 MAZDA 5
Replaced Part Number of Matched AC Compressor:
BP4S61K00
A/C COMPRESSOR CLUTCH KIT INCLUDES:
5 GROOVE PULLEY WITH BEARING ALREADY PRESSED IN FRONT PLATE (HUB) C-CLAMPS CENTER BOLT SHIMS
How to replace with new AC compressor Clutch
tuning_race_hero
A/C AC Air Compressor Clutch Kit For Mazda 3&5 2.0L 2004 2005 2006 2007 2008-09
DESCRIPTION：
COMPARE THIS KIT WITH THE OTHERS
THIS KIT INCLUDES
THE PULLEY WITH BEARING PRESSED IN
THE COIL WITH FULL HARNESS
THE CLUTCH PLATE HUB
THIS KIT INCLUDES THE CENTER BOLT, C-CLAMPS, AND SHIMS
Replacement for:
2004-2009 MAZDA 3 NON TURBO ENGINE
2006-2010 MAZDA 5
Replaced Part Number of Matched AC Compressor:
BP4S61K00
A/C COMPRESSOR CLUTCH KIT INCLUDES:
5 GROOVE PULLEY WITH BEARING ALREADY PRESSED IN
FRONT PLATE (HUB)
C-CLAMPS
CENTER BOLT
SHIMS
How to replace with new AC compressor Clutch
1) Always wear eye protection and start with installation tools.
2) Removing the clutch rotor using a puller.
3) Removing the bearing from the clutch rotor.
4) Measuring the clearance between the compressor clutch friction surfaces.
5) Ohm checking a one wire AC compressor clutch coil, the ground is supplied through the body of the compressor.
6) Two types of high-pressure cutout switches. The single function switch interrupts compressor function if system pressure becomes too high. The dual function switch first engages the high-speed cooling fan in an attempt to lower pressure by increasing heat transfer at the condenser. However, if system pressure continues to rise after the fan has been engaged, then the switch will interrupt compressor operation.
7) Holding the clutch hub with a suitable tool while the bolt or nut is removed.
8) Removing the clutch plate and hub using a puller.
9) Searching related installation video on the internet will be also recommended.
Item Specifics
Brand :
Precision Auto Labs
Interchange Part Number :
BP4S61K00, CC4361450E, 2021946, 2022254, C1436
Manufacturer Part Number :
57463, 58463, CO 10759C, 639409, 5511699, 2011266
FITS 1 :
MAZDA 5 2006-2010
Warranty :
Lifetime
Placement on Vehicle :
Front
FITS 2 :
FITS MAZDA 3 2004-2009 NON TURBO ENGINE
UPC :
does not apply
Payment
Payment:
We accept Credit card, Debit card, Apple Pay, Google Pay and PayPal.
A
dditional shipping fee may be charged for buyers from Puerto Rico, Hawaii, Alaska, Guam, and the U.S. military address of the United States or other remote area (zone 8-10).
Most of the items come with a 30-day warranty covering manufacturing defect. High value products would get a longer warranty, some of them up to 2 year or 5 years or lifetime warranty, excluding any damage by the user.
Shipping
Processing time: Within 1 business day after payment
Ship from:
California USA
or KY Warehouse Or IL warehouse Or NY Warehouse.
Time of delivery:
US: about
1-6
business days;
Note：Please leave us your detailed valid street address because big package is not allowed to be stored in PO.BOX.
Returns
1）Defective product can be returned for exchange and the exchange must be notified within
30 days
from the date of purchase. All items must be returned in NEW condition, including the packaging and all accessories.
2）Buyers are responsible for the item return shipping fee.
3)
Please note that all return must be pre-approved by our co-worker,and it have a return merchandise anthorization(RMA)number.Unauthorzed return will not be accepted.
About Us
Precision Auto Labs (PAL) is one of the most experienced manufacturers in performance fuel and ignition systems around the world, proving itself on the racetracks and drag strips of the world. PAL offers a comprehensive selection of performance products, including coils, digital fuel injection systems, fuel injectors, distributors, caps, rotors, ignition wires etc. PAL products are 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance. 100% Quality Guarantee! 100% Fast Delivery! 100% Money Back Guarantee!
PAL produces the coils only with high quality materials to ensure the performance and durability, having 15% more energy than OE coils.
1. Wire--Imported from German Elektrisoal, top quality in the world.
2. Epoxy-- Imported from German Elektrisoal, top quality high insulation epoxy.
3. Plastic GE Valox resin, professional high voltage di-electric resistant resin.
4. Manufactured in facility TS16949 quality control system certified.
5. Enable to Keep Releasing energy over 6000 RPM.
6. Continuous Ignition.
7. Ignition Coil Born For Racing
Contact us
1) Please feel free to contact if you have any problem, we’ll reply ASAP.
2) We greatly appreciate your
Five Stars Positive
feedback. It means a lot to us. Thanks for your support.
tuning_race_hero
Hot Sale
A/C AC Compressor Clutch Assembly For 2006-2009 Dodge Ram 2500 3500 6.7L TEM275
USD 48.36
AIR CONDITIONING AC COMPRESSOR CLUTCH REPAIR KIT FOR SUBARU FORESTER AND IMPREZA
USD 47.92
12V AC A/C COMPRESSOR CLUTCH REPAIR KIT FOR SUBARU FORESTER IMPREZA WRX 2.0-2.5L
USD 47.92
Fit 2008-2014 Subaru Forester WRX 2.0 2.5L AC Compressor Clutch Kit Pulley Coil
USD 47.92
A/C AC Air Compressor Clutch Kit For Mazda 3&5 2.0L 2004 2005 2006 2007 2008-09
USD 39.99
New Arrival
1/2 Inch by 300 feet Twisted Three Strand Nylon Anchor Rope Dock-line Rope Boat
USD 52.99
15-72971 Heat Heater A/C Fan Air Vent Blend Door Actuator for Chevy GMC 604-112
USD 22.45
For 2011-2019 Ford F250 F350 Super Duty 6.7L Powerstroke Diesel Cooler Kit
USD 79.76
For BMW Hub Centric Wheel Spacers Staggered Kit 5x120(2) 15mm &(2) 20mm W/ Bolts
USD 67.95
E3581M Fuel Pump Module Assembly For Cadillac Escalade 2004-2007 5.3L 6.0L 6.2L
USD 59.75
Fast Delivery
Paypal Verified
A/C AC Air Compressor Clutch Kit For Mazda 3&5 2.0L 2004 2005 2006 2007 2008-09
DESCRIPTION：
COMPARE THIS KIT WITH THE OTHERS
THIS KIT INCLUDES
THE PULLEY WITH BEARING PRESSED IN
THE COIL WITH FULL HARNESS
THE CLUTCH PLATE HUB
THIS KIT INCLUDES THE CENTER BOLT, C-CLAMPS, AND SHIMS
Replacement for:
2004-2009 MAZDA 3 NON TURBO ENGINE
2006-2010 MAZDA 5
Replaced Part Number of Matched AC Compressor:
BP4S61K00
A/C COMPRESSOR CLUTCH KIT INCLUDES:
5 GROOVE PULLEY WITH BEARING ALREADY PRESSED IN
FRONT PLATE (HUB)
C-CLAMPS
CENTER BOLT
SHIMS
How to replace with new AC compressor Clutch
1) Always wear eye protection and start with installation tools.
2) Removing the clutch rotor using a puller.
3) Removing the bearing from the clutch rotor.
4) Measuring the clearance between the compressor clutch friction surfaces.
5) Ohm checking a one wire AC compressor clutch coil, the ground is supplied through the body of the compressor.
6) Two types of high-pressure cutout switches. The single function switch interrupts compressor function if system pressure becomes too high. The dual function switch first engages the high-speed cooling fan in an attempt to lower pressure by increasing heat transfer at the condenser. However, if system pressure continues to rise after the fan has been engaged, then the switch will interrupt compressor operation.
7) Holding the clutch hub with a suitable tool while the bolt or nut is removed.
8) Removing the clutch plate and hub using a puller.
9) Searching related installation video on the internet will be also recommended.
Item Specifics
Brand :
Precision Auto Labs
Interchange Part Number :
BP4S61K00, CC4361450E, 2021946, 2022254, C1436
Manufacturer Part Number :
57463, 58463, CO 10759C, 639409, 5511699, 2011266
FITS 1 :
MAZDA 5 2006-2010
Warranty :
Lifetime
Placement on Vehicle :
Front
FITS 2 :
FITS MAZDA 3 2004-2009 NON TURBO ENGINE
UPC :
does not apply
Payment
Shipping
Returns
About Us
Contact us
Payment:
We accept Credit card, Debit card, Apple Pay, Google Pay and PayPal.
A
dditional shipping fee may be charged for buyers from Puerto Rico, Hawaii, Alaska, Guam, and the U.S. military address of the United States or other remote area (zone 8-10).
Most of the items come with a 30-day warranty covering manufacturing defect. High value products would get a longer warranty, some of them up to 2 year or 5 years or lifetime warranty, excluding any damage by the user.
Processing time: Within 1 business day after payment
Ship from:
California USA
or KY Warehouse Or IL warehouse Or NY Warehouse.
Time of delivery:
US: about
1-6
business days;
Note：Please leave us your detailed valid street address because big package is not allowed to be stored in PO.BOX.
1）Defective product can be returned for exchange and the exchange must be notified within
30 days
from the date of purchase. All items must be returned in NEW condition, including the packaging and all accessories.
2）Buyers are responsible for the item return shipping fee.
3)
Please note that all return must be pre-approved by our co-worker,and it have a return merchandise anthorization(RMA)number.Unauthorzed return will not be accepted.
Precision Auto Labs (PAL) is one of the most experienced manufacturers in performance fuel and ignition systems around the world, proving itself on the racetracks and drag strips of the world. PAL offers a comprehensive selection of performance products, including coils, digital fuel injection systems, fuel injectors, distributors, caps, rotors, ignition wires etc. PAL products are 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance. 100% Quality Guarantee! 100% Fast Delivery! 100% Money Back Guarantee!
PAL produces the coils only with high quality materials to ensure the performance and durability, having 15% more energy than OE coils.
1. Wire--Imported from German Elektrisoal, top quality in the world.
2. Epoxy-- Imported from German Elektrisoal, top quality high insulation epoxy.
3. Plastic GE Valox resin, professional high voltage di-electric resistant resin.
4. Manufactured in facility TS16949 quality control system certified.
5. Enable to Keep Releasing energy over 6000 RPM.
6. Continuous Ignition.
7. Ignition Coil Born For Racing
1) Please feel free to contact if you have any problem, we’ll reply ASAP.
2) We greatly appreciate your
Five Stars Positive
feedback. It means a lot to us. Thanks for your support.
All right reserved.
OUR PRODUCT
You are purchasing a Reman compressor with clutch.
SEE COMPATIBILITY
We would appreciate if you could leave us a note with the vehicle specification (Year, Make, Model and Engine) in PayPal when making the payment or in the eBay email system, that way we can be sure that the a/c compressor will fit properly.
THE SYSTEM (COMPRESSOR INSTALLATION)
3 Month Ac Warranty & Agreement
Follow all local, state and federal regulations when servicing mobile A/C systems and read this instruction sheet prior to starting any repairs.
Oil charges and oil types should be closely adhered to for proper A/C performance.
If you are uncertain of
OIL CHARGE OR REFRIGERANT TOTAL SYSTEM  CHARGE
refer to the under hood decal or, OEM service manual.
USE ONLY R-12 OR R-134a REFRIGERANT.
1.
Remove compressor, receiver drier or accumulator, orifice tube or expansion valve.
2.
Flush the condenser and evaporator using
NON-OIL BASED
A/C flush. On expansion valve systems
THE VALVE MUST BE REMOVED
before the evaporator can be flushed.
FLUSHED CONDENSERS FROM OUTLET TO INLET AND EVAPORATORS FROM INLET TO OUTLET.
WARNING:
NEWER STYLE CONDENSER DESIGNS ARE VERY HARD, AND SOMETIME IT WOULD BE IMPOSSIBLE TO DO FLUSH, IN THOSE CASES IT IS SUGGESTED THAT IF THE COMPRESSOR HAS A MAJOR FAILURE THE CONDENSER SHOULD BE REPLACED.
3.
Drain all the oil from the new compressor and dispose of according to local, state and federal laws.
NOTE:
if you compressor has a drain plug you will need to open it up and drain what  oil is in there too,
4.
Install half oil charge into the compressor and the remainder throughout the system. Turn compressor shaft 8-10 full revolutions to insure front seal and other internal parts are lubricated.
5.
Install new receiver drier or accumulator and new orifice tube or expansion valve.
6.
Evacuate the A/C system for a minimum of one hour.
7.
After evacuation install half the refrigerant charge and let the system set for 1 minute. This will allow the refrigerant to pick up oil and spread more evenly throughout the system.
8.
Start engine whit A/C controls on MAX AIR with door and windows open.
9.
Add the remaining charge of refrigerant as called for by the manufacture.
RETURN POLICY
Any warranty after 30 days, customer must pay all shipping charge.
All returns must be pre- approved.
SHIPPING
Free ground shipping to the continental US
Shipment to Alaska, Hawaii, Puerto Rico, Virgin Island, American Samoa and Guam do not qualify for free shipping, shipping is to these locations (USPS Only)
YOUR SATISFACTION IS OUR MAIN GOAL