-40%

2008-2020 DODGE JOURNEY HEATER HOSE w/METAL TEE SUPPLY-RETURN 2.4 VVT 5058437AK

$ 21.08

Availability: 163 in stock
  • Manufacturer Part Number: 05058437AK
  • Restocking Fee: No
  • Country/Region of Manufacture: United States
  • Modification Description: Replacement Kit with Brass Tee.
  • Manufacturer Warranty: No Warranty
  • Item must be returned within: 14 Days
  • Return shipping will be paid by: Buyer
  • Type: heater hose assembly with metal Tee
  • OE/OEM Part Number: 05058437AK
  • Brand: DODGE JOURNEY Heater Supply And Return Hose
  • Condition: New
  • Interchange Part Number: 05058437AD; 05058437AI; 05058437A
  • Features: Rust Resistant
  • Modified Item: Yes
  • Superseded Part Number: 05058437AK
  • Returns Accepted: Returns Accepted
  • Surface Finish: Brass, Stainless Steel, EPDM
  • Placement on Vehicle: Engine Compartment
  • Refund will be given as: Money Back
  • Other Part Number: 5058437AD; 5058437AI; 5058437A

    Description

    AFTER-MARKET
    'Heater Hose Assembly Tee Kit'
    Replacement for a
    2008-2019 Dodge Journey 2.4VVT
    Part Number: 05058437AK
    I am the original inventor. The only AUTHORIZED EBAY SELLERS of this assembly are AutoPartsHere and FlybyJet. My assembly is made in the USA using quality USA parts and shipped through USPS Priority Mail, which is much faster than First Class.
    NOTE: This part will fit a Dodge Journey 2.4 liter engine only.
    PLEASE BE SURE TO READ THE ENTIRE LISTING BEFORE PURCHASE!
    IMPORTANT:  The line drawing above shows the 'original factory parts' (highlighted in yellow) that become defective due to heat, mainly because the tee fitting is
    made of plastic
    , is very thin-walled and is under a tremendous amount heat from the catalytic converter underneath and it cracks.
    Our hose assembly kit is a long-term solution to the problem because it uses a brass tee instead of plastic. Why buy from the middleman dealer that wants to sell you another full assembly with the same plastic tees that will leave you stranded again? I WAS that person stranded on the road just like you! 200,000 miles later, I have had no issues after installing my own engineered assembly kits.
    NOTE: The listing price is for ONE of our aftermarket hose assembly kits which can be used to replace either the upper or lower lines coming from the front heater core to the plastic thermostat manifold on the engine, and to the aluminum tubes on the fire wall that goes to the back of the vehicle to the rear heater core.
    You can purchase just one of our kits if you are on a budget and need to get back on the road quickly or purchase two kits to replace both the upper and lower assemblies at the same time for full peace of mind.
    Repairing your Journey is easy to do. You already paid for the aluminum tubing that is attached to the firewall when you bought the vehicle, so why buy their pre-molded assembly that forces you to re-buy the tubing, too?
    You won't need to crawl under your vehicle in an effort to remove and re-attach more tubing, because our 'heater hose assembly' attaches to the existing tubing from the firewall. Make the entire repair right under the hood. Our assembly saves you time, money and unnecessary work.
    My Hose Kit also keeps the Tee connection point 6 inches up higher, away from the exhaust manifold and catalytic converter, keeping it cooler from the intense HEAT!
    I would have just sold a Tee if that would have worked, but the original 'factory molded' hose was heated, vulcanized and stretched out of its 'standard size' where the 3 hoses connect to the Tee. To replace just the Tee you would have to cut back all the hoses to fit the new Tee properly, but then the hoses would all be too short. The high-temp hosing I supply in my Kit will fit snugly onto all points on the manifold, heater-core and the aluminum tube going to the rear heater.
    No doubt at all! If your upper or lower heater hose cracked, this kit will fix it!
    I also have a Dodge Journey. I was very angry when the OEM Tee (a thin-walled piece of plastic engineered by them to fail AND just out of warranty) happened to crack on the interstate quickly overheating my car as every drop of coolant pumped out in 60 seconds. Stranded on the highway on a hot day, I refused to give Dodge 0+ for another sub-standard plastic part. They designed it with a plastic tee so we would have to keep replacing the entire assembly. As an auto a/c and hvac mechanic I redesigned their junk and fixed the problem for the long term.
    People have told me that Dodge and other auto shops have charged them upwards of 0 to fix this.
    If you can use a screwdriver and have 15 minutes you can do a full and proper long-term repair on one or both assemblies. Tools needed are a sharp knife and regular screw driver. New Ideal Tridon Hy-Gear Stainless Steel clamps included.
    These hose assembly kits are assembled in my Auto Air Conditioning shop in SW Florida, USA.
    The Dodge Journey FWD, 2.4L 4 Cyl DOHC 16V Dual VVT,  can't take overheating. These hose assemblies fit many models and are made extra long, so for best fit you can trim off some of the extra hose.
    After installing your new hose assembly fill with antifreeze. Wait for thermostat to open after reaching operating temperature and top off cooling system.
    We include detailed 'installation instructions' on the packing slip in English and Spanish, plus
    I include my phone number if you need some help with the installation.
    I am happy to help.
    If you cannot install the assembly on your vehicle properly, please consult a certified mechanic.
    These kits are intellectual property, patent pending. This listing (text/images) may not be duplicated or transferred. It is the property of AutoPartsHere on Ebay.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Thank you for viewing my listing.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    PLEASE READ AND AGREE TO ALL THE
    INFORMATION BELOW BEFORE BUYING. THANK YOU.
    (The Terms/Conditions below supersede eBay's prefilled information.)
    Terms and Conditions
    Please double-check your Ebay shipping address and update it if necessary, prior to purchase.
    Please ask any questions prior to purchase.
    Make sure you have read and understand the entire listing description and photos before purchase.
    Shipping
    Items are always securely packaged.  We ship the same day or within one (1) business day, but please allow up to two (2) business days. Package sent by USPS Priority mail.
    Shipping Cost
    Please click on the Shipping Tab above.
    Returns
    We accept returns for domestic buyers only. No international returns. Buyer pays for return shipping. Item must be in the same condition as originally sent.  Our assembly IS exactly as described and it WILL work without issues if properly installed on designated Dodge Journeys. No return allowed if item was installed, damaged, missing parts or used on vehicle.
    If you have any further questions, please message me through eBay. Thank you.
    Fits Dodge Journeys 2.4 liter
    - 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
    Store category
    Sign Up Now !
    You may also like
    New AC Compressor adapter fittings For Denso 10S17F 10S20F LS
    Product Description
    Item specifics
    Condition: New
    Manufacturer Part Number:10S17F & 10S20F
    Interchange Part Number:451-1105, 451-1106, 440-822, 440-823
    Brand:Aftermarket
    UPC:Does not apply
    INCLUDED:
    #8AN and #10AN fittings.
    2 sealing washers.
    2 O-rings.
    2 stainless Steel Socket Head Cap Screw bolts
    Fit Denso 10S17F & 10S20F Compressors
    Note: Adapter will not work with compressor included with the Chevrolet performance #19155066 serpentine drive kit
    Payment
    Delivery details
    Terms of sales
    About us
    Contact us
    Payment
    Paypal Preferred.
    Delivery details
    · USPS Standard Shipping.
    · Order processing: within 1 business day upon payment(excluding holidays and weekends).
    · Shipped from: US Warehouse
    Terms of sales
    · Please read the item description and check the pictures carefully before ordering.
    · Return or refund is available only if item DOA or there's error in item description causing the item not fitting the need. In such cases, seller pays for all related shipping cost.
    · Returns are also acceptable if buyer purchased this by mistake and item is still in good condition for reselling. Buyer is responsible for all related shipping cost.
    · Buyer need to file an application for return within 60 days after receiving the item. Items returned must be still in good condition as they were received.
    Return notes:
    1.Please contact us for return and we will proceed with following instructions.
    2.Returning the package with a tracking method, like USPS. The RMA#(Return Merchant Authorization Number=Your ebay ID) must be clearly written on the return package, otherwise the package will be refused.
    3.Email us the return tracking number.
    4.All returns will be inspected prior to a credit being issued.
    About us
    We are specialized in auto parts accessories for many years and we also sell items on ebay for several years.
    If you have questions about our items and services, please kindly feel free to contact us, we will try our best to satisfy you within 24 business hours.
    Contact us
    Please be free to email us by clicking the "Asking a question" link, once there is any pre-sale or after-sale inquiry for our items. We will email back in 24 working hours.
    If you'd like to put a neutral or negative feedback, or open the ebay or paypal case, please email us so we could try our best to resolve the issue.
    Feedback